Keyboard shortcuts

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Recording

A picture of your model shows one side of it. A recording turns it all the way round, films your canvas as you draw on it, or films Flatty itself while you work — and writes a file that plays, ready to post, or to drop into a store page.

Point any pane’s title at Recorder. Everything a recording needs is on the one pane, and the heading of each card tells you what you are about to get before you make it.

What you can film

The Record select at the top picks the subject, and the rest of the pane follows it — controls that make no sense for what you chose are greyed out with the reason on them, rather than disappearing. Whole cards are a different matter: filming the window has no turn, no frame and no background to set, so those three are not drawn at all.

The model, turning

The extruded model on a turntable, with the ground and the shading you have set, starting from whatever angle your 3D view is pointed at. Line the shot up there first — orbit until it looks right — and the recording begins from exactly that view.

The line art, turning

The same turn, drawn as line art instead. It uses the renderer and the settings your Vector pane is on, so what you have tuned there is what you get.

The canvas, as you draw

A time-lapse of your artwork appearing. This one does not turn anything — it takes a frame each time the drawing changes, so time spent thinking costs nothing and the length of the film follows how much you actually did rather than how long you sat there.

Press Record, then draw. Press Stop when you are happy, or let it run to the frame count in the heading and stop on its own.

The whole app window, as you use it

Flatty filming itself: the window exactly as it is on screen, while you work in it. This is the one recording that does not end on its own — it runs until you stop it, or until the cap on its card runs out — and it is the only one you can pause.

It needs ffmpeg, and it writes a video and nothing else.

Filming the window

Choosing the window swaps out the middle of the pane. The turn, the frame and the background all go — there is no camera to move, no shape to choose and no ground behind it, because the frame is the window — and one card takes their place.

Sizethe height the file comes out at. The window’s own size is the default and the cheapest, since anything else has the encoder resample every frame. The other three — 720p, 1080p, 1440p — are the heights video is actually delivered at.
Frames a secondten to sixty, thirty by default. Deliberately lower than the turn’s ceiling: every frame here is read back out of the window while you are using it, so a high rate slows down the very thing being filmed.
Video qualityhow hard the encoder tries. This one is about the picture rather than the file size.
Stop afterminutes, one to sixty, ten by default. A take nobody stopped would otherwise fill the disk.

The heading counts the pixels the file will hold, before you record anything, the same way the frame’s heading does for a turn.

The pointer in the recording is drawn, not filmed. The real one is not in the picture the window hands back, so without Draw the pointer the footage shows controls reacting to nothing at all. Mark clicks puts a ring wherever a button goes down — and with no pointer drawn there is nothing to mark on, so it is greyed out rather than left there doing nothing.

Both are on to begin with.

Under those, once the app has worked it out, a line says whether the video is being made by your graphics card or by the processor. It is the one thing on this card you cannot change, only find out, and it is the difference between a recording that costs the app almost nothing and one that shares a core with it.

The turn

This card and the two after it belong to a rendered recording — the model, the line art or the canvas. Filming the window they are not drawn at all: it has the one card above instead.

Camera picks how it moves, and the three are genuinely different films rather than settings on one.

Turntableall the way round, from the angle you set. The classic showcase.
Hold stillthe camera does not move — but the recording is not still. Your ground does: a drifting grid, a swell, the mist rolling. It is the shot for showing off the atmosphere with nothing else competing for attention.
Driftthe camera traces small circles around where you left it, the way a hand would. The near side of your model moves against the far side and the whole thing reads as solid — the trick that makes a still render look three-dimensional.

Then three sliders, and the heading adds them up for you.

Turnshow far round the camera goes — or, on a drift, how many little circles it makes. Either way a whole number of them ends exactly where it began, so the file loops without a jump. Holding still, there is nothing to count and the slider says so.
Secondshow long the finished film runs. Filming the canvas, this is the most it can run — it stops there, or when you do.
Frames a secondhow smooth it is. Thirty is the default and looks it.

A GIF cannot count faster than fifty frames a second. The format measures each frame in hundredths of a second, so above fifty it stops being able to hold the rate it claims. The slider stops there for that reason.

The frame

Size is the long edge, and it is the one setting that decides how big your file comes out — a recording pays for its size on every single frame, which is why the sizes offered here stop lower than the ones for still pictures.

Shape is the proportion:

Same as the viewyour 3D pane’s own shape, so what you framed is what you get. Filming the canvas, it is the canvas’s shape.
Squarefor a thumbnail or an avatar.
Wide (16:9)for a store page or a video.
Tall (9:16)for a phone held upright.

The heading shows the exact pixels the two settle on, before you record anything.

A taller frame shows less of your model, not more. The camera looks up and down by a fixed amount whatever shape you pick, so narrowing the frame narrows what is visible at the sides. A wide model in a tall frame would have its ends cut off — which is what the next switch is for.

Keep the model in frame stands the camera back far enough that nothing clips at any point in the turn, not just at the angle you started from. It is on by default. Turn it off if you have set the distance deliberately and want exactly that.

What it sits on

Sits on is the background. Four swatches cover most of it — the view’s own colour, black, white, or nothing at all — and the button beside them opens the full colour wheel for anything else.

The first swatch, the view’s own, follows your theme: change the interface colours later and a new recording follows them. A colour you mix stays exactly that colour.

Picking None gives you a recording with no background, so your model can go straight onto a coloured page.

What comes out

Animated GIF needs nothing installed, and for a rendered recording it is always there to be had. It plays in any browser, any chat window, any store page, with no player and no plugin. For flat pixel art it is exact — the colours you painted are the colours in the file.

Video makes an .mp4 as well, which is far smaller and sharper than the GIF for the same recording. It needs ffmpeg on your machine; if you have not got it, the switch is greyed out and says so. Video quality picks how hard it tries — Smaller file, Balanced or Best looking — and only the video reads it, never the GIF.

Two things can be wrong with ffmpeg, and they read differently. Not having one at all is visible straight away, and greys the switch out. Having one that cannot write where Flatty can see it — a sandboxed install is the usual cause — can only be found out by trying it, so that one is reported once the app has tried, and after it a recording with nothing else to write is refused rather than run into nothing. A turn asked for as a GIF and a video still gets made: the GIF is written by Flatty itself and needs nothing installed, so the missing video is a warning beside a finished file.

Filming the window there is nothing here to choose. It always writes a video and only a video, at the size and quality set on its own card. There is no GIF at all, and the switch says why: a take that runs until you stop it is not a length the format can carry.

Keep the frames leaves behind the numbered PNGs the recording was built from, in a folder beside it, in case you want to take them into something else. Off by default, since they are only working material.

Everything lands in your project’s exports folder, alongside every other export, under a name that says what it is: .view.gif for the model or the canvas, .vector.gif for the line art, the same two with .mp4, and .window.mp4 for the app itself.

Keys in the footer, at the foot of the SOURCE card, puts record, pause and stop along the bottom of the window, so a recording can be started, held and finished without coming back to this pane. That matters most for the one recording that films the pane you would otherwise be clicking in.

They lead the group at the right-hand end, ahead of the flag, so the three controls that are always there keep their places. All three appear together — pause is greyed out with its reason for the recordings that cannot pause, rather than left out, so the distance from record to stop never depends on what you are filming.

Off unless you ask for it. The footer was cut from eight controls to three on purpose, and this group has no business being there for somebody who is not filming anything.

While it is recording

A bar replaces the Record button and counts the frames as they are made.

Stop means two different things, and which one depends on what you are filming. A turn is thrown away: it is half a render, and nothing half-written is left behind. A take of the window is finished and written — its frames were encoded as they were made, so there is a film there worth keeping.

Pause is the window’s alone, next to Stop and greyed out with its reason for everything else. A paused recording is simply not fed, so the wait is left out of the film rather than held as a still: stop to think, go and find something, and the recording carries on from where it left off.

A turntable renders as fast as it can, which is deliberate: it is a job to wait for, and the app will feel slow for the few seconds it takes. Filming the canvas is the opposite — it only does any work when you actually draw, so it stays out of your way, and the app sits quietly while you think. Filming the window is the one that costs something the whole time it runs: each frame is read back out of the window, which is why its rate stops at sixty rather than the turn’s ceiling.

Opening a different project stops a recording in progress. It is filming this drawing into this project’s folder, and carrying it across would give you one film of two different things.